###########################################
# Configuration file created by WILIBOX UAB
# HW: XScale family
# Access control list
# Updated 2007-06-12
###########################################

# Section: ssh
sshd.status=enabled
sshd.port=22

# Section: users
users.status=enabled
users.1.status=enabled
users.1.name=admin
users.1.password=oHSl3yqR.t1uQ

# Section: httpd
httpd.status=enabled
httpd.backlog=100
httpd.external.status=disabled
httpd.max.connections=50
httpd.max.request=51200
httpd.port.admin=444
httpd.port.https=443

# Section: forker
forker.status=enabled 

# Section: syslog
syslog.status=enabled
syslog.file=/var/log/messages
syslog.file.msg.level=debug
syslog.file.umask=077
syslog.fwd.status=disabled
syslog.fwd.msg.level=info
syslog.rcms.alarm.status=disabled
syslog.rcms.alarm.level=info
syslog.rotate.status=enabled
syslog.rotate.at.size=102400 

 # Section: sysconf
sysconf.trace=enabled 

 # Section: netconf
netconf.status=enabled 

netconf.1.status=enabled
netconf.1.devname=ixp0
netconf.1.type=ethernet
netconf.1.mode=lan
netconf.1.up=enabled
netconf.1.ip=192.168.99.1
netconf.1.netmask=255.255.255.0 

netconf.2.status=enabled
netconf.2.devname=ixp1
netconf.2.type=ethernet
netconf.2.mode=lan
netconf.2.up=enabled
netconf.2.ip=192.168.5.10
netconf.2.netmask=255.255.255.0

netconf.3.status=enabled
netconf.3.devname=ath0
netconf.3.type=wireless
netconf.3.mode=lan
netconf.3.up=enabled
netconf.3.ip=192.168.4.10
netconf.3.netmask=255.255.255.0 

#Network devices for MSSIDs
netconf.4.status=enabled
netconf.4.up=enabled
netconf.4.devname=ath0.ms1
netconf.4.ip=192.168.200.1
netconf.4.netmask=255.255.255.0 

netconf.5.up=enabled
netconf.5.status=enabled
netconf.5.devname=ath0.ms2
netconf.5.ip=192.168.201.1
netconf.5.netmask=255.255.255.0 

netconf.6.up=enabled
netconf.6.status=enabled
netconf.6.devname=ath0.ms3
netconf.6.ip=192.168.202.1
netconf.6.netmask=255.255.255.0   

 # Section: radio
radio.status=enabled  
radio.countrycode=LT

radio.1.status=enabled
radio.1.devname=ath0
radio.1.ieee_mode=G
radio.1.mode=master
radio.1.channel=1
radio.1.rate.max=11M
radio.1.rate.auto=enabled
radio.1.frag=2346
radio.1.rts=off
radio.1.txpower=5 

 # Section: vssid
vssid.status=enabled
 
vssid.1.status=enabled
vssid.1.parent=ath0
vssid.1.devname=ath0.ms1

vssid.2.status=enabled
vssid.2.parent=ath0
vssid.2.devname=ath0.ms2  

vssid.3.status=enabled
vssid.3.parent=ath0
vssid.3.devname=ath0.ms3 

 # Section: wireless
wireless.status=enabled

#parent
wireless.1.status=enabled
wireless.1.devname=ath0
wireless.1.security=none
wireless.1.ssid=2_slimtest
wireless.1.l2_isolation=disabled

#children
wireless.2.status=enabled
wireless.2.devname=ath0.ms1
wireless.2.ssid=2_slimtest1
wireless.2.security=none 

ireless.3.status=enabled
wireless.3.devname=ath0.ms2
wireless.3.ssid=2_slimtest2
wireless.3.security=none 

wireless.4.status=enabled
wireless.4.devname=ath0.ms3
wireless.4.ssid=2_slimtest3
wireless.4.security=none 

 # Section: wacl
wacl.status=enabled

## no ACL will be used
## acl mac entries will be ignored
wacl.1.status=enabled
wacl.1.devname=ath0
wacl.1.policy=open
wacl.1.acl.1.status=enabled
wacl.1.acl.1.mac=00:0B:6B:80:D3:E1
# uncomment to add one more user
# write mac instead TestPCMAC(WLAN)
#wacl.1.acl.2.status=enabled
#wacl.1.acl.2.mac=TestPCMAC(WLAN)

## all clients are allowed 
## except user with mac 00:0B:6B:80:D3:E2
## and TestPC3MAC user mac
wacl.2.status=enabled
wacl.2.devname=ath0.ms1
wacl.2.policy=allow
wacl.2.acl.1.status=enabled
wacl.2.acl.1.mac=00:0B:6B:80:D3:E2
# uncomment to add one more user
# write mac instead TestPCMAC(WLAN)
#wacl.2.acl.2.status=enabled
#wacl.2.acl.2.mac=TestPC3MAC(WLAN) 

## all clients are denyed 
## except user with mac 00:0B:6B:80:D3:E3
## and TestPC3MAC user mac
wacl.3.status=enabled
wacl.3.devname=ath0.ms2
wacl.3.policy=deny
wacl.3.acl.1.status=enabled
wacl.3.acl.1.mac=00:0B:6B:80:D3:E4
# uncomment to add one more user
# write mac instead TestPCMAC(WLAN)
#wacl.3.acl.2.status=enabled
#wacl.3.acl.2.mac=TestPCMAC(WLAN) 

## no ACL will be used
## acl mac entries will be ignored
wacl.4.status=disabled
wacl.4.devname=ath0.ms3
wacl.4.policy=open
wacl.4.acl.1.status=disabled
wacl.4.acl.1.mac=00:0B:6B:80:D3:E4
# uncomment to add one more user
# write mac instead TestPCMAC(WLAN)
#wacl.4.acl.2.status=enabled
#wacl.4.acl.2.mac=TestPCMAC(WLAN)