###################################################
# Configuration file created by WILIBOX UAB
# HW: x86 family (Wistron RDAT-81, Compex WP54(A)G)
# Authentication: Internal UAM login page
# Updated: 2007-10-18
###################################################

# Section: aaa
aaa.status=enabled
aaa.1.status=enabled
aaa.1.devname=ath0
aaa.1.name=UAM_ON_ath0
aaa.1.nas.1.status=enabled
aaa.1.nas.1.profile=NAS_UAM_PROFILE
aaa.1.wan.1.status=enabled
aaa.1.wan.1.devname=eth1

aaa.auth.1.status=enabled
aaa.auth.1.authtype=PAP
# USE YOUR RADIUS SERVER IP ADDRESS
aaa.auth.1.host=192.168.2.182
aaa.auth.1.name=AUTH_SERVER
# USE YOUR RADIUS SERVER SERCRET
aaa.auth.1.secret=testing123
aaa.auth.1.stripdomain=disabled

aaa.domain.1.status=enabled
aaa.domain.1.name=DOMAIN_PROFILE
aaa.domain.1.auth.1.status=enabled
aaa.domain.1.auth.1.profile=AUTH_SERVER

aaa.nas.1.status=enabled
aaa.nas.1.acct.status=enabled
aaa.nas.1.auth.status=enabled
aaa.nas.1.auth.1.status=enabled
aaa.nas.1.auth.1.type=uam
aaa.nas.1.auth.1.profile=LOCAL_PAGES_PROFILE
aaa.nas.1.devname=ath0
aaa.nas.1.domain.1.status=enabled
aaa.nas.1.domain.1.profile=DOMAIN_PROFILE
aaa.nas.1.domain.default=1
aaa.nas.1.maxclients=12
aaa.nas.1.name=NAS_UAM_PROFILE
aaa.nas.1.security.type=none
aaa.nas.1.verbose=enabled

aaa.uam.1.status=enabled
aaa.uam.1.name=LOCAL_PAGES_PROFILE
aaa.uam.1.loginurl=https://%lanip/uam/login.cgi


# Section: netconf
netconf.status=enabled
netconf.1.status=enabled
netconf.1.alias.status=disabled
netconf.1.devname=eth1
netconf.1.ip=192.168.30.2
netconf.1.mode=wan
netconf.1.netmask=255.255.255.0
netconf.1.promisc=disabled
netconf.1.type=ethernet
netconf.1.up=enabled

netconf.2.status=enabled
netconf.2.alias.status=disabled
netconf.2.devname=eth0
netconf.2.ip=192.168.99.1
netconf.2.mode=lan
netconf.2.netmask=255.255.255.0
netconf.2.promisc=disabled
netconf.2.type=ethernet
netconf.2.up=enabled

netconf.3.status=enabled
netconf.3.alias.status=disabled
netconf.3.devname=ath0
netconf.3.ip=192.168.199.1
netconf.3.mode=lan
netconf.3.netmask=255.255.255.0
netconf.3.promisc=disabled
netconf.3.type=wireless
netconf.3.up=enabled


# Section: radio
radio.status=enabled
radio.1.status=enabled
radio.1.autochannel.status=disabled
radio.1.channel=6
radio.1.devname=ath0
radio.1.frag=off
radio.1.ieee_mode=G
radio.1.mode=Master
radio.1.rate.auto=enabled
radio.1.rate.max=54M
radio.1.rts=off
radio.1.txpower=5
radio.countrycode=LT


# Section: wireless
wireless.status=enabled
wireless.1.security=none
wireless.1.ssid=2_tester
wireless.1.ssid_broadcast=enabled
wireless.1.status=enabled
wireless.1.devname=ath0
wireless.1.l2_isolation=disabled
wireless.1.max_clients=16


# Section: route
route.status=enabled
route.1.status=enabled
route.1.devname=eth1
# USE YOUR GATEWAY IP ADDRESS
route.1.gateway=192.168.30.100
route.1.ip=0.0.0.0
route.1.netmask=0


# Section: httpd
httpd.status=enabled
httpd.backlog=100
httpd.external.status=disabled
httpd.max.connections=50
httpd.max.request=51200
httpd.port.admin=444
httpd.port.https=443


# Section: resolv
resolv.status=enabled
resolv.nameserver.1.status=enabled
# USE YOUR DNS SERVER IP ADDRESS
resolv.nameserver.1.ip=195.14.162.78


# Section: sshd
sshd.status=enabled
sshd.port=22


# Section: syslog
syslog.status=enabled
syslog.file=/var/log/messages
syslog.file.msg.level=debug
syslog.file.umask=077
syslog.fwd.status=disabled
syslog.fwd.msg.level=info
syslog.rcms.alarm.status=disabled
syslog.rcms.alarm.level=info
syslog.rotate.status=enabled
syslog.rotate.at.size=102400


# Section: users
users.status=enabled
users.1.status=enabled
users.1.name=admin
users.1.password=oHSl3yqR.t1uQ


# Section: firewall
firewall.status=enabled

firewall.rule.1.table=nat
firewall.rule.1.chain=PREROUTING
firewall.rule.1.protocol=TCP
firewall.rule.1.dport=53
firewall.rule.1.target=ACCEPT

firewall.rule.2.table=nat
firewall.rule.2.chain=PREROUTING
firewall.rule.2.protocol=UDP
firewall.rule.2.dport=53
firewall.rule.2.target=ACCEPT

firewall.rule.3.table=nat
firewall.rule.3.chain=PREROUTING
firewall.rule.3.protocol=TCP
firewall.rule.3.dport=67:68
firewall.rule.3.target=ACCEPT

firewall.rule.4.table=nat
firewall.rule.4.chain=PREROUTING
firewall.rule.4.protocol=UDP
firewall.rule.4.dport=67:68
firewall.rule.4.target=ACCEPT

firewall.rule.5.table=nat
firewall.rule.5.chain=PREROUTING
firewall.rule.5.protocol=TCP
firewall.rule.5.in=ath0
firewall.rule.5.dport=443:444
#If static IP is used and no DHCP client enabled then uncomment this line
firewall.rule.5.dst=192.168.199.1
firewall.rule.5.target=ACCEPT

firewall.rule.6.table=nat
firewall.rule.6.chain=PREROUTING
firewall.rule.6.protocol=TCP
firewall.rule.6.in=ath0
firewall.rule.6.auth=not-auth
firewall.rule.6.auth.in=ath0
firewall.rule.6.target=REDIRECT
firewall.rule.6.t.redirect.port=38080

firewall.rule.7.table=mangle
firewall.rule.7.chain=PREROUTING
firewall.rule.7.acct.in=ath0

firewall.rule.8.table=mangle
firewall.rule.8.chain=POSTROUTING
firewall.rule.8.acct.out=ath0

firewall.rule.9.target=SNAT
firewall.rule.9.table=nat
firewall.rule.9.chain=POSTROUTING
firewall.rule.9.t.snat.source=192.168.30.2
firewall.rule.9.out=eth1

#If static IP is used and no DHCP client enabled then comment these lines
#firewall.rule.10.table=nat
#firewall.rule.10.chain=POSTROUTING
#firewall.rule.10.protocol=TCP
#firewall.rule.10.out=ath0
#firewall.rule.10.dport=443:444
#firewall.rule.10.auth=not-auth
#firewall.rule.10.auth.out=ath0
#firewall.rule.10.target=DROP