WBD 900Mhz configuration
From wiliGear wiki
Contents |
Description
If you want to see 900Mhz channels in dropdown list, need to use Wili-CPE or Wili-AP skins. Also need to add this keys via expert mode:
device.limitband.1.bands.1.band=900 device.limitband.1.bands.1.status=enabled device.limitband.1.devname=ath0 device.limitband.1.status=enabled device.limitband.status=enabled
Then save, back to skin mode, reboot and will get your 900 Mhz channels.
Supported radios:
- 900 - Z-COM GZ-901
- 900SR - Ubiquiti SR9
- 900XR - Ubiquiti XR9
- WMR365 - DBII F33
Configuration sample
AP_(Master).cfg
################################# # Configuration created by skin # Skin: wili-ap, version: 5.23.20559 # WBD_900Mhz_configuration ################################# # # Section: aaa aaa.status=disabled # # Section: bridge bridge.1.ageing=300 bridge.1.devname=br0 bridge.1.fd=1 bridge.1.hello=20 bridge.1.maxage=300 bridge.1.port.1.devname=eth0 bridge.1.port.1.status=enabled bridge.1.port.2.devname=ath0 bridge.1.port.2.status=enabled bridge.1.status=enabled bridge.1.stp.status=disabled bridge.ip6tables=disabled bridge.iptables=disabled bridge.status=enabled # # Section: device device.limitband.1.bands.1.band=900 device.limitband.1.bands.1.status=enabled device.limitband.1.devname=ath0 device.limitband.1.status=enabled device.limitband.status=enabled # # Section: dhcpc dhcpc.1.devname=br0 dhcpc.1.status=disabled dhcpc.status=enabled # # Section: discoveryd discoveryd.status=enabled # # Section: dnsmasq dnsmasq.1.devname=ath0 dnsmasq.1.status=enabled dnsmasq.status=enabled # # Section: ebtables ebtables.status=disabled # # Section: httpd httpd.backlog=100 httpd.external.status=disabled httpd.max.connections=50 httpd.max.request=51200 httpd.port.admin=444 httpd.port.http=80 httpd.port.https=443 httpd.status=enabled httpd.verbose=disabled # # Section: netconf netconf.1.devname=br0 netconf.1.ip=192.168.1.30 netconf.1.mode=wan netconf.1.netmask=255.255.255.0 netconf.1.status=enabled netconf.1.type=bridge netconf.1.up=enabled netconf.2.devname=ath0 netconf.2.ip=0.0.0.0 netconf.2.mode=lan netconf.2.netmask=255.255.255.255 netconf.2.status=enabled netconf.2.type=wireless netconf.2.up=enabled netconf.3.devname=ixp1 netconf.3.ip=0.0.0.0 netconf.3.mode=wan netconf.3.netmask=255.255.255.255 netconf.3.status=enabled netconf.3.type=ethernet netconf.3.up=enabled netconf.4.devname=eth0 netconf.4.ip=0.0.0.0 netconf.4.netmask=255.255.255.255 netconf.4.status=enabled netconf.4.up=enabled netconf.5.devname=eth1 netconf.5.ip=0.0.0.0 netconf.5.netmask=255.255.255.255 netconf.5.status=enabled netconf.5.up=enabled netconf.status=enabled # # Section: radio radio.1.acktimeout=25 radio.1.autochannel.1.channel=10 radio.1.autochannel.1.status=enabled radio.1.autochannel.status=enabled radio.1.chanattr.1.bw=full radio.1.chanattr.1.channel=8 ## real output 908 MHz radio.1.chanattr.1.freq=2452 radio.1.chanattr.1.status=enabled radio.1.chanattr.2.bw=full radio.1.chanattr.2.channel=9 ## real output 913 MHz radio.1.chanattr.2.freq=2457 radio.1.chanattr.2.status=enabled radio.1.chanattr.3.bw=full radio.1.chanattr.3.channel=10 ## real output 918 MHz radio.1.chanattr.3.freq=2462 radio.1.chanattr.3.status=enabled radio.1.chanattr.4.bw=full radio.1.chanattr.4.channel=11 ## real output 923 MHz radio.1.chanattr.4.freq=2467 radio.1.chanattr.4.status=enabled radio.1.channel=10 radio.1.devname=ath0 radio.1.frag=off radio.1.ieee_mode=PUREG radio.1.mode=master radio.1.parent=wifi0 radio.1.rate.auto=enabled radio.1.rate.max=54M radio.1.rts=off radio.1.status=enabled radio.1.turbo=disabled radio.1.txpower=20 radio.countrycode=US radio.status=enabled # # Section: resolv resolv.status=enabled # # Section: route route.1.devname=br0 route.1.gateway=192.168.1.10 route.1.ip=0.0.0.0 route.1.netmask=0 route.1.status=enabled route.status=enabled # # Section: rssid rssid.devname=ath0 rssid.status=disabled # # Section: skin skin.active=wili-ap skin.editing.mode=skin skin.management.1.devname=eth0 skin.management.2.devname=ath0 skin.management.vlan.status=disabled skin.version=5.23.20559 # # Section: snmpd snmpd.contact=contact snmpd.name=name snmpd.rocommunity=public snmpd.ropassword=password snmpd.rouser=public snmpd.status=enabled # # Section: sshd sshd.port=22 sshd.status=enabled # # Section: statsd statsd.status=enabled # # Section: syslog syslog.file=/var/log/messages syslog.file.msg.level=info syslog.file.umask=077 syslog.fwd.status=disabled syslog.rotate.at.size=102400 syslog.rotate.status=true syslog.status=enabled # # Section: users users.1.name=admin users.1.password=oHSl3yqR.t1uQ users.1.status=enabled users.status=enabled # # Section: vlan vlan.status=disabled # # Section: vssid vssid.status=disabled # # Section: wds wds.1.parent=ath0 wds.1.status=disabled wds.status=disabled # # Section: wireless wireless.1.devname=ath0 wireless.1.fastframes=disabled wireless.1.frameburst=disabled wireless.1.inter_isolation=disabled wireless.1.l2_isolation=disabled wireless.1.max_clients=64 wireless.1.security=none wireless.1.ssid=www.wilibox.com wireless.1.ssid_broadcast=enabled wireless.1.status=enabled wireless.1.wmm=disabled wireless.status=enabled
STA_(Managed).cfg
################################# # Configuration created by skin # Skin: wili-cpe, version: 5.23.20559 # WBD_900Mhz_configuration ################################# # # Section: aaa aaa.status=disabled # # Section: bandwidth bandwidth.status=disabled # # Section: bridge bridge.1.ageing=300 bridge.1.devname=br0 bridge.1.fd=1 bridge.1.hello=20 bridge.1.maxage=300 bridge.1.port.1.devname=ath0 bridge.1.port.1.status=enabled bridge.1.port.2.devname=eth0 bridge.1.port.2.status=enabled bridge.1.status=enabled bridge.1.stp.status=disabled bridge.arptables=disabled bridge.ip6tables=disabled bridge.iptables=disabled bridge.status=enabled bridge.vlan=disabled # # Section: device device.mode=bridge device.limitband.1.bands.1.band=900 device.limitband.1.bands.1.status=enabled device.limitband.1.devname=ath0 device.limitband.1.status=enabled device.limitband.status=enabled # # Section: dhcp-fwd dhcp-fwd.client.1.status=disabled dhcp-fwd.server.1.status=disabled dhcp-fwd.status=disabled # # Section: dhcpc dhcpc.1.devname=br0 dhcpc.1.status=disabled dhcpc.status=disabled # # Section: dhcpd dhcpd.status=disabled # # Section: discoveryd discoveryd.status=enabled # # Section: dnsmasq dnsmasq.1.devname=br0 dnsmasq.1.status=disabled dnsmasq.status=disabled # # Section: ebtables ebtables.rule.1.chain=PREROUTING ebtables.rule.1.in=ath0 ebtables.rule.1.status=enabled ebtables.rule.1.t.arpnat_target=ACCEPT ebtables.rule.1.table=nat ebtables.rule.1.target=arpnat ebtables.rule.2.chain=POSTROUTING ebtables.rule.2.out=ath0 ebtables.rule.2.status=enabled ebtables.rule.2.t.arpnat_target=ACCEPT ebtables.rule.2.table=nat ebtables.rule.2.target=arpnat ebtables.rule.3.chain=BROUTING ebtables.rule.3.protocol=0x888e ebtables.rule.3.status=enabled ebtables.rule.3.table=broute ebtables.rule.3.target=DROP ebtables.status=enabled # # Section: httpd httpd.backlog=100 httpd.external.status=disabled httpd.max.connections=50 httpd.max.request=51200 httpd.port.admin=444 httpd.port.http=80 httpd.port.https=443 httpd.status=enabled httpd.verbose=disabled # # Section: netconf netconf.1.devname=br0 netconf.1.ip=192.168.1.31 netconf.1.mode=lan netconf.1.netmask=255.255.255.0 netconf.1.status=enabled netconf.1.type=bridge netconf.1.up=enabled netconf.2.devname=ath0 netconf.2.ip=0.0.0.0 netconf.2.mode=lan netconf.2.netmask=255.255.255.255 netconf.2.status=enabled netconf.2.type=wireless netconf.2.up=enabled netconf.3.devname=eth0 netconf.3.ip=0.0.0.0 netconf.3.mode=lan netconf.3.netmask=255.255.255.255 netconf.3.status=enabled netconf.3.type=ethernet netconf.3.up=enabled netconf.status=enabled # # Section: pppoe pppoe.1.status=disabled pppoe.status=disabled # # Section: radio radio.1.acktimeout=48 radio.1.autochannel.status=disabled radio.1.chanattr.1.bw=full radio.1.chanattr.1.channel=8 ## real output 908 MHz radio.1.chanattr.1.freq=2452 radio.1.chanattr.1.status=enabled radio.1.chanattr.2.bw=full radio.1.chanattr.2.channel=9 ## real output 913 MHz radio.1.chanattr.2.freq=2457 radio.1.chanattr.2.status=enabled radio.1.chanattr.3.bw=full radio.1.chanattr.3.channel=10 ## real output 918 MHz radio.1.chanattr.3.freq=2462 radio.1.chanattr.3.status=enabled radio.1.chanattr.4.bw=full radio.1.chanattr.4.channel=11 ## real output 923 MHz radio.1.chanattr.4.freq=2467 radio.1.chanattr.4.status=enabled radio.1.devname=ath0 radio.1.frag=off radio.1.ieee_mode=PUREG radio.1.mode=managed radio.1.parent=wifi0 radio.1.rate.auto=enabled radio.1.rate.max=54M radio.1.rts=off radio.1.rx_antenna=1 radio.1.rx_antenna_diversity=disabled radio.1.status=enabled radio.1.turbo=disabled radio.1.tx_antenna=1 radio.1.tx_antenna_diversity=disabled radio.1.txpower=20 radio.countrycode=US radio.status=enabled # # Section: resolv resolv.status=disabled # # Section: route route.1.devname=br0 route.1.gateway=192.168.1.10 route.1.ip=0.0.0.0 route.1.netmask=0 route.1.status=enabled route.status=enabled # # Section: skin skin.active=wili-cpe skin.version=5.23.20559 # # Section: sshd sshd.port=22 sshd.status=enabled # # Section: syslog syslog.file=/var/log/messages syslog.file.msg.level=info syslog.file.umask=077 syslog.status=enabled # # Section: users users.1.name=admin users.1.password=oHSl3yqR.t1uQ users.1.status=enabled users.status=enabled # # Section: wds wds.1.parent=ath0 wds.1.status=disabled wds.status=disabled # # Section: wireless wireless.1.compression=disabled wireless.1.devname=ath0 wireless.1.fastframes=disabled wireless.1.frameburst=disabled wireless.1.inter_isolation=disabled wireless.1.l2_isolation=disabled wireless.1.ssid=www.wilibox.com wireless.1.ssid_broadcast=enabled wireless.1.status=enabled wireless.1.wmm=disabled wireless.status=enabled # # Section: wpasupplicant wpasupplicant.keys=enabled wpasupplicant.profile.1.status=disabled wpasupplicant.status=disabled wpasupplicant.timestamp=enabled wpasupplicant.verbose=4 wpasupplicant.wait_for_interface=enabled skin.editing.mode=skin
